aluminum barges
8 Foot Wide
Standard thickness is 2 Feet.
Deeper, higher load capacity
barges available on request.
10 Foot Wide
Standard thickness is 2 Feet.
Deeper, higher load capacity
barges available on request.
Sectional Barges
For the above,
8 ft wide sections are 2 ft deep.
10 ft wide sections are 4 ft deep.
Ramps
Spuds and Push Knees
Ramps built to suit your needs.
Manual or wireless remote controls.
Width and Length to your specs.
$125 / sqft
Railings
Spuds and Push Knees
Spuds and Push Knees
Safety hand-rails,
ABYC Compliant $97 / ft
Railings, ABYC Compliant
Railings 12" high $117 / ft
Railings 36" high $130 / ft
Spuds and Push Knees
Spuds and Push Knees
Spuds and Push Knees
Push Knees. 4x4 tubing $1,600
Pair of Manual Spuds 2" dia. with flag poles
(requires push knees) $2,450
Winch with Remote controls for 2" spuds.
Battery and solar charging. Deck reinforcements, ABYC Compliant electrical system.
$2,970
Pair of 5" Dia. spuds, Winches with Remote controls. Battery and solar charging. Deck reinforcements, ABYC Compliant electrical system.
$13,900
Barge math
Safety . That's the rule. The load capacities listed in the price list above are carefully calculated to keep you safe while maximizing your pay load capacities. In brief, we substract the tare weight from the maximum load capacity of the barge then factor that by F.O.S = 2.0. The resulting "Save Deck" Load must be centered at the load center as indicated on the deck of your barge, and further the center of gravity, measured vertically, of the load must be within 25% of the barge width, of the deck surface. The load must also be secured such that it is not possible for the load to shift no matter the sea state or the loading and unloading procedures. For further insights or consultation for a particular load please consult with BetterBarge.b or a qualified naval architect or engineer. Further the deck load may not exceed 280 psf except where the deck has been appropriately engineered and or point loads have been engineered accordingly.
Control station / Wheel house / outboard protection frame
Swivel Tiller Seat
Flip top,
Holds Fuel tank,
battery, tool storage etc.
30" x 20" 15" high.
$1790
Wheel House
4' x 4' base with 5'x10' roof, open back $7,800
Removable Lexan windows $1290.
Vinyl back wall , window, zipper door. $1250
Metal back wall with window, lockable door. $3600
Console / Outboard Protection
36' x 18' Includes 80 L Fuel tank, battery box,
tool storage, cup holders and on top, a
self- draining tool storage area.
$3,170
36"x 36" Includes all of the above plus a 36"x18" work bench / vise mount .
$3,800.
Outboard Protection Frame
$1,790
Fixed Outboard Brackets
9.9 to 60 hp $910
75 to 125 hp $1,500
150 to 350 hp $2,600
Wood Decking
Raked Barge End
Pressure Treated $21.75 / sqft
Rough Pine $19,25 / sqft
Hard Wood $26,10 / sqft
Raked Barge End
Raked Barge End
Adds 2 feet to length
Front or Back (or both)
$2,562 ea.
Deck accessories
Cleats
Deck Winches
Deck Winches
Welded aluminum
SEVERE DUTY
14" cleats.
$320 each.
Deck Winches
Deck Winches
Deck Winches
Permanent 8500 lb deck winch
Battery and solar charging.
Deck reinforcements, ABYC Compliant electrical system. Remote Control.
$3,590,
Deck Cranes.
Deck Winches
Deck Cranes.
2,200 lb capacity electric jib crane
Battery and solar charging,
Deck reinforcements, ABYC Compliant electrical system. Remote Control.
$7,900
3500 Lb Knuckle Boom, electric.
$16,500
Stability analysis extra.